|
Title: HASEGAWA P-40E Post by: FMATAS on August 03, 2008, 03:49:54 AM I just purchased the new Hasegawa 1/32 P-40E kit. Any suggestions or avice would be appreciated.
Title: Re: HASEGAWA P-40E Post by: P-40 Admin on August 03, 2008, 08:57:16 AM http://forum.largescaleplanes.com/index.php?showtopic=20297
http://forum.largescaleplanes.com/index.php?showtopic=20361 Title: Re: HASEGAWA P-40E Post by: Mark Joyce on August 07, 2008, 10:18:18 PM I don't have the kit but from what I've seen and read the breakdown is basically the same as for Hasegawa's 1/48th P-40E, with the numerous plugs and inserts. As a result, the most important aspect is aligning and dry-fitting the parts before gluing. Almost everyone, including me, has found it better to deviate from the instructions (at least for the 48th scale P-40) and glue the tail section on each fuselage half first, instead of gluing them together and then adding them as a "plug."
One area that Hasegawa got it wrong, which in my opinion is inexcusable since it was done correctly in the 48th scale kit, is in adding an extra frame to the windscreen. Mark |