P-40 Warhawk Forums
December 14, 2024, 09:00:50 PM
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
: SMF - Just Installed!
Home
Help
Search
Login
Register
P-40 Warhawk Forums
>
P-40 Warhawk Forums
>
P-40 Models
>
P-40B/C 1/24 (FINISHED AT LAST!!!!)
Pages:
1
[
2
]
3
« previous
next »
Print
Author
Topic: P-40B/C 1/24 (FINISHED AT LAST!!!!) (Read 102176 times)
Alex Kontiveis
Newbie
Posts: 26
Re: P-40B/C 1/24
«
Reply #15 on:
June 21, 2008, 01:46:05 AM »
Dear Mark and p-40 boys,
The work so far, is only the 3% of the total result. Be patient. Many surprises will boost your interest.
I'm a Mechanical engineer...and engines are always my babies!!!
The cockpit is lowered (i trusted Vintage and I messed up). I was socked when my floor was 1" higher the wing!!!
I had to rebuild all the floor and backside from the beginning, thats why I was late.
Here are the Cockpit's side walls
and the cockpit area in a dry fit test before assembled....
Of course nothing of Vintage Kit is used so far (except the 2 halfs of the fuselage). Everything you see is scratched.
The whole construction is dedicated to you guys!! For all of you who love this bird!
cheers
Alex
«
Last Edit: June 24, 2008, 12:21:59 AM by Joker
»
Logged
hbbates
Newbie
Posts: 12
Re: P-40B/C 1/24
«
Reply #16 on:
July 07, 2008, 09:20:09 AM »
Hello Alex
Ive got the detail and measurement article on the early “Longnose” P40/Tomahawk posted that shown some of the wing gun layout
A hi res version is at
http://www.freewebs.com/p40-tomahawk/
A low res version in PDF is posted on Hyperscale
http://downloads.hyperscale.com/longnosehawks_download.html
Logged
Alex Kontiveis
Newbie
Posts: 26
Re: P-40B/C 1/24
«
Reply #17 on:
July 08, 2008, 02:11:59 PM »
Τhanks a lot!!! Great work!!!
I noticed the wrong usual drawings of the gunbays panels on wing top!! I couldn't understand if the drawings were correct or not compared to real pictures...
Great guideline for everybody who wants to be accurate!!!
Best regards
Alex
Logged
Alex Kontiveis
Newbie
Posts: 26
Re: P-40B/C 1/24
«
Reply #18 on:
July 26, 2008, 01:38:24 PM »
FUSELAGE INTERIOR
Hi guys, this is my newest update.
I began building the tail wheel, according to drawings
Next coming where the modifications at rudder, and control mechanisms.
Here are some of the items (HYDRAULIC RESERVOIR, Battery)
And finally ALL together
THE VISIBLE AREAS
«
Last Edit: July 30, 2008, 02:43:19 PM by Joker
»
Logged
P-40 Admin
Administrator
Sr. Member
Posts: 291
Re: P-40B/C 1/24 (updated)
«
Reply #19 on:
July 28, 2008, 05:18:19 AM »
Your model is coming along great, some very nice detail you are putting in!
Logged
Alex Kontiveis
Newbie
Posts: 26
Re: P-40B/C 1/24 (updated)
«
Reply #20 on:
July 30, 2008, 02:41:57 PM »
Thank you guys,
Here is my next update
RUDDER
The VFS P-40's Rudder is a disaster! I had no choice. Make a new one. Filling the rudder with putty, is not the best thing you can do, but it is the only way to make it seems like a rudder. I decided to build it from the beginning.
Here is the VFS rudder and beside at right the plastic sheet i used.
10 thin evergreen rods were placed on the surface. I sand them enough.
Next step...Cast Vinyl wrapping, and aluminum
After 2 days of work on metal, i managed to give the shapes. Surfacer covered the rudder.
and READY....
Thank U!
Alex
«
Last Edit: July 30, 2008, 02:44:56 PM by Joker
»
Logged
Alex Kontiveis
Newbie
Posts: 26
Re: P-40B/C 1/24 (updated)
«
Reply #21 on:
August 04, 2008, 02:30:53 PM »
ELEVATORS & AILERONS
By the same way I built the rudder, elevators and ailerons were constructed easily.
For the tail wings, I used aluminum foil, and copper. Its a very difficult procedure because I had to place its time a riveted panel by panel. The result is very realistic, and all the plane will be wrapped by the same way!
NEXT PART concerns the fuselage finishing.
Logged
Mark Joyce
Sr. Member
Posts: 408
Re: P-40B/C 1/24 (updated)
«
Reply #22 on:
August 07, 2008, 10:02:24 PM »
Your work continues to amaze me, Alex! Too bad some of that interior detail won't be visible, or at least not very well, once the fuselage is closed up. I look forward to more posts on your progress.
Mark
Logged
Ignorance is bliss
Alex Kontiveis
Newbie
Posts: 26
Re: P-40B/C 1/24 (updated)
«
Reply #23 on:
August 07, 2008, 11:36:27 PM »
Quote from: Mark Joyce on August 07, 2008, 10:02:24 PM
Your work continues to amaze me, Alex! Too bad some of that interior detail won't be visible, or at least not very well, once the fuselage is closed up. I look forward to more posts on your progress.
Mark
Τhank you Mark, I appreciate it. I'm glad you like it. Any comments or detections are welcome always. Don't hesitate for something wrong during the project.
PS. Where can i find an original picture (black n white) of the specific plane? (Taylor's or G. Welch??) or the ACCURATE PROFILE of this?
Thank u in advance
Alex
Logged
Alex Kontiveis
Newbie
Posts: 26
Re: P-40B/C 1/24 ...end of fuselage
«
Reply #24 on:
August 31, 2008, 04:06:42 PM »
Here comes the final part of
Section -01-
FUSELAGE'S FINAL CONSTRUCTION
At first I decided to rebuild the instrument panel. Once again, I was not pleased using Eduard's Bezels, so I followed my method, for sure.
Aluminum sheet, laminated instrument panel's print out etc.
The final result. I think its much better than previous one.
My next step concerns the inspection side door. According to real images, using Aluminum and copper the result is this one:
Finishing with these small items, I made a new windscreen and its basement from the beginning. A difficult construction. But after a few days of hard work the result is better than I expected.
After that, I finished with my new Canopy. I decided to open the left urgent window. I added the central top nerve on the canopy (is missing from Vintage's canopy)
A new firewall was necessary. Look the Kit's one....
As far as you Know, the Kit has no riveted fuselage, many main lines are missing.
According to some serious profiles, I riveted ALL the fuselage panel by panel, wrapping her with aluminum foil.
Some extra details are added such a new fuel riveted tank, Fuel caps etc.
My next part concerns
SECTION 02
(WINGS)
1. Wheel Wells
2. Main Weels
3. Wing Gun bay
4. Wrapping
5. Fuselage Guns.
6. Flaps (from Cammett)
Thank you for your time, I hope you like it so far
Cheers
Alex Kontiveis
«
Last Edit: September 02, 2008, 03:41:36 PM by Joker
»
Logged
GAJouette
Newbie
Posts: 4
Re: P-40B/C 1/24 (updated)
«
Reply #25 on:
September 02, 2008, 03:30:30 AM »
Alex,
Outstanding craftsmanship on your P-40.True art.
regards,
Gregory Jouette
Logged
Alex Kontiveis
Newbie
Posts: 26
Re: P-40B/C 1/24 (updated)
«
Reply #26 on:
September 03, 2008, 02:14:15 AM »
Quote from: GAJouette on September 02, 2008, 03:30:30 AM
Alex,
Outstanding craftsmanship on your P-40.True art.
regards,
Gregory Jouette
TNX Greg. I appreciate it.
This bird deserves a good work always. Any scale, any type. One of the most important aircrafts of war.
Logged
Mark Joyce
Sr. Member
Posts: 408
Re: P-40B/C 1/24 (updated)
«
Reply #27 on:
September 07, 2008, 08:03:33 AM »
Your work is simply stunning, Alex! I'm envious of your skill and patience.
Mark
Logged
Ignorance is bliss
Alex Kontiveis
Newbie
Posts: 26
Re: P-40B/C 1/24 (updated)
«
Reply #28 on:
September 11, 2008, 04:33:17 PM »
Quote from: Mark Joyce on September 07, 2008, 08:03:33 AM
Your work is simply stunning, Alex! I'm envious of your skill and patience.
Mark
TNX Mark. I hope you like it so far
SECTION B' wings
Part -01/B-
WHEEL WELLS
Lets start today from the wheel wells.
The first thing i did, was a 2mm of raising of the main wheel wall. (only the inner side).
Here you can see the cuttings of the gun bays, and the modification of the wheel wells.
Although the simplicity of their construction, I spent 3 days of making these.
Thank you
Next coming part will be the Wheel's main Landing gear
«
Last Edit: September 11, 2008, 11:37:24 PM by Joker
»
Logged
P-40 Admin
Administrator
Sr. Member
Posts: 291
Re: P-40B/C 1/24 (updated)
«
Reply #29 on:
September 12, 2008, 05:10:26 AM »
This model is really looking fantastic and you have some incredible detail built in!
Logged
Pages:
1
[
2
]
3
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
P-40 Warhawk Forums
-----------------------------
=> General Discussion
=> P-40’s in WWII
=> P-40’s Today
=> P-40 Models
=> Old Forum
Loading...