P-40 Warhawk Forums
December 14, 2024, 07:07:56 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: SMF - Just Installed!
 
   Home   Help Search Login Register  
Pages: [1] 2
  Print  
Author Topic: P-40L: Finished!!!!  (Read 58928 times)
Mark Joyce
Sr. Member
****
Posts: 408



View Profile
« on: November 08, 2009, 12:01:46 PM »

For a little change of pace, I've started a 48th scale P-40L using the Eduard P-40M kit with the older Aeromaster P-40 Merlin resin nose.  This nose is quite similar to the resin nose provided in the AMtech P-40F/L kit, although there are enough differences that it appears the two aren't interchangeable.  However, both noses suffer from a couple of inaccuracies to a certain extent.  First, the area in front of the exhausts is "perforated," for lack of a better word, somewhat similar to what is seen on the later P-40M/N.  I've never seen these holes on a real P-40F/L.  Second, the area behind the exhausts is "scalloped," again for lack of a better word.  This is accurate for a short-tailed P-40F which had the round, or tubular, exhausts but wasn't present for the later Merlin versions, which had the flared exhausts.

So, I went about correcting these inaccuracies with a little judicious use of gap-filling super glue and, for the scallops, a bit of sheet styrene as well.  The end result is on the left, after applying some Mr. Surfacer 1000.



Regards,

Mark
« Last Edit: April 11, 2010, 05:42:47 AM by Mark Joyce » Logged

Ignorance is bliss
Vince_M
Sr. Member
****
Posts: 322


View Profile
« Reply #1 on: November 11, 2009, 04:54:29 AM »

Hey Mark,

Thanks for sharing pics.   I have a P-40F in progress from AmTech.
I'll check into those "scallops" and see if I need to fill them.
I have the Ultracast flared exhausts.  It caused me to have to grind out very carefully the exhaust area.  I used a dremel with a tiny, round detailer so I wouldn't mess up the outer cowling.
Then I plan to use Apoxie to pack down in the holes and attach the stubs.  It has enough working time to let me do this.  That's the plan anyway....

Logged
P-40 Admin
Administrator
Sr. Member
*****
Posts: 291



View Profile Email
« Reply #2 on: November 15, 2009, 12:58:48 PM »

I'll be watching this, I have the AMtech P-40F/L in the stash to do some time.  Just starting some work on a 1/48 B-17G and would like to have one of my P-40's on the diorama.  Looking forward to seeing the modifications you do.
Logged
Mark Joyce
Sr. Member
****
Posts: 408



View Profile
« Reply #3 on: November 27, 2009, 12:31:17 AM »

A bit more progress.  Here are the Eduard cockpit sidewalls with a few photoetch details.  Although probably not 100% accurate for a Merlin P-40 they look busy enough.  You can see where I've cut off the front of the fuselage in preparation for the resin nose.



Thanks for looking, and a happy Thanksgiving to all!

Mark
Logged

Ignorance is bliss
Mark Joyce
Sr. Member
****
Posts: 408



View Profile
« Reply #4 on: November 28, 2009, 05:06:48 AM »

The fuselage halves are glued together and the resin nose has been attached.  The fit of the nose is pretty good, although temporary placement of the lower wing shows a gap that will have to be dealt with.



Mark
Logged

Ignorance is bliss
Vince_M
Sr. Member
****
Posts: 322


View Profile
« Reply #5 on: December 01, 2009, 06:35:33 AM »

Hey Mark, nice photos!
Yeah that cowl flap actuator handle on the right cockpit wouldn't be there for an "L" because they had the electrically operated ones.  No big deal.  How many people would even know that?!  Smiley

That resin nose looks great on the Mauve/Eduard kit.  I used Aves Apoxie to fill the gaps and it sands up really nice and does not shrink.
Logged
Mark Joyce
Sr. Member
****
Posts: 408



View Profile
« Reply #6 on: December 02, 2009, 10:40:46 AM »

Vince,

Thanks for the comments.  I hadn't even thought of the electrically operated cowl flaps; I simply added the photoetch detail from the Eduard set for the manual control!  Anyway, as you said few people will notice it so I won't mess with it at this point.

I've not used Aves Apoxie before.  Where's a good place to get or order it from? 

Mark
Logged

Ignorance is bliss
Vince_M
Sr. Member
****
Posts: 322


View Profile
« Reply #7 on: December 02, 2009, 09:56:25 PM »

Hi Mark,

I got mine at the IPMS nationals in 2005 from Aves display table!
Good news is it's readily available from amazon now.
They even have white (mine is natural color).
I'll put a picture in my P-40F thread so you can see how well it sands and files with plastic and resin joints.

http://www.amazon.com/Apoxie-Sculpt-1-Lb-White/dp/B0013UDWXI/ref=sr_1_1?ie=UTF8&s=home-garden&qid=1259761677&sr=8-1
Logged
Mark Joyce
Sr. Member
****
Posts: 408



View Profile
« Reply #8 on: December 19, 2009, 10:36:46 AM »

Vince, a belated thanks on where to get Aves Apoxie!

With the holidays upon us, along with a busy couple weeks at work, little progress has been made recently.  However, here's the remainder of the cockpit including the IP.  Sorry for the lack of a clear close-up of the IP:



Mark
Logged

Ignorance is bliss
P-40 Admin
Administrator
Sr. Member
*****
Posts: 291



View Profile Email
« Reply #9 on: January 14, 2010, 12:16:58 PM »

Really good progress on this so far, can't wait to see how it turns out.
Logged
Mark Joyce
Sr. Member
****
Posts: 408



View Profile
« Reply #10 on: January 19, 2010, 10:54:08 AM »

Still plugging away at this slowly but surely.  For anyone who has built the Mauve/Eduard P-40 series and used the resin cockpit included in the Eduard boxing, you'll find out that you can end up with some pretty serious wing root gaps.  One method to alleviate this issue is to use some scrap styrene as spacer bars inside the fuselage to spread it (learned this from Tom Cleaver).  The problem in my case is that you can't really spread the fuselage (at least in front of the cockpit) without affecting the fit of the resin nose.  So, I still ended up with some wing root gaps that needed filling.

Anyway, I've spent the last few weeks filling, sanding, re-filling, re-sanding, re-scribing lost panel lines, etc. in an effort to get this thing ready for painting.  Soon I'll prime the beast and, hopefully, will only have a few minor seams to fix  Tongue.

Also, I've had to make some cowl flaps out of sheet styrene, since none are included for a Merlin P-40:

The mauve/Eduard kits lack canopy rails, so I made some out of strip styrene:

You'll notice the plastic is of two colors.  Most of it is from the Mauve kit while the bottom fuselage/wing portion is from the Eduard boxing. The one in the Mauve kit was warped and I was too lazy to fix it  Embarrassed.

Mark
Logged

Ignorance is bliss
Mark Joyce
Sr. Member
****
Posts: 408



View Profile
« Reply #11 on: February 07, 2010, 11:36:08 PM »

Well, after weeks of seam work the beast is finally primed and ready to go  Smiley.  The end result is far from perfect but good enough for me.  I've rescribed some panel lines around the nose to more accurately those found on a Merlin P-40 and also drilled out the wing guns in preparation for hypodermic needles as gun barrels.

Mark
Logged

Ignorance is bliss
Vince_M
Sr. Member
****
Posts: 322


View Profile
« Reply #12 on: February 08, 2010, 09:46:50 PM »

Excellent!

I have one of those Mauve kits in my stash...I think it's a P-40N.
You are inspiring me to build it!  I have the decals for "Lope's Hope".
I think I have a photoetch canopy rail set for that kit.

Keep photos coming!!!!
Logged
GatorDude
Newbie
*
Posts: 7


View Profile
« Reply #13 on: February 10, 2010, 07:59:55 PM »

This model is really looking good.  Speaking of "Lope's Hope," I'm reading "Into the Teeth of the Tiger" by Donald Lopez now.  It's a great read.
« Last Edit: February 10, 2010, 08:02:06 PM by GatorDude » Logged
Vince_M
Sr. Member
****
Posts: 322


View Profile
« Reply #14 on: March 09, 2010, 01:51:57 AM »

Mark,

How do you apply your Mr. Surfacer 1000?
Airbrush?

I have a spray can of it (the white kind) and it seems to go on heavy out of the can yet dries somewhat translucent.  Yours seems so good and opaque.  Are you putting on lots of coats?

Vince
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!