Mark,
How do you apply your Mr. Surfacer 1000?
Airbrush?
I have a spray can of it (the white kind) and it seems to go on heavy out of the can yet dries somewhat translucent. Yours seems so good and opaque. Are you putting on lots of coats?
Vince
Hi Vince,
I apply it with an airbrush, thinning it with lacquer thinner. I also have a bottle of Gunze Mr. Color Thinner, which I believe is the "recommended" thinner; however, I've yet to try it. At least with lacquer thinner, you need to thin it quite a bit otherwise you will end up with 'spider webs' all over the place. Ask me how I know!
I don't really keep track of how many coats I apply, although in some areas I apply it more heavily than others to cover more noticeable flaws.
I also have a can of Mr. Surfacer 1000 and like you have found it goes on heavy out of the can. You could probably decant it, although I've never tried since I use the bottled stuff instead.
HTH,
Mark