P-40 Warhawk Forums
November 05, 2024, 11:40:59 PM
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
: SMF - Just Installed!
Home
Help
Search
Login
Register
P-40 Warhawk Forums
>
P-40 Warhawk Forums
>
P-40 Models
>
1:48 Mauve P-40N "Lope's Hope"
Pages:
1
...
4
5
[
6
]
7
8
« previous
next »
Print
Author
Topic: 1:48 Mauve P-40N "Lope's Hope" (Read 75344 times)
Vince_M
Sr. Member
Posts: 321
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #75 on:
March 15, 2019, 01:53:26 AM »
Mark, thanks for the advice.
I'm experimenting on the bottom of the plane first. I may try some Future under the decal to help with silvering.
Logged
Vince_M
Sr. Member
Posts: 321
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #76 on:
March 18, 2019, 12:16:33 PM »
I was procrastinating putting on the shark mouth decal and for good reason. It was very difficult to position and broke right at the upper corner. It will take more decal solvent but it should lay down. I didn’t want to have to paint to fix it but I will have to. Oh well. Lots of difficult curves in that area.
Logged
Vince_M
Sr. Member
Posts: 321
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #77 on:
March 19, 2019, 12:01:15 PM »
Rainy days, Mondays, and Shark Mouth Decals always get me down....
I dreaded this for so long. Actually this is before Solvaset Decal solvent which works miracles with repeat application.
No doubt I see red, black, and white paint as well as an art brush in my future too.
Just wish I still had those young eyes!
Logged
Mark Joyce
Sr. Member
Posts: 408
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #78 on:
March 19, 2019, 10:04:40 PM »
Ouch, Vince, I feel your pain! Hopefully the Solvaset worked its wonders. I had to use some on my current build to get the decals to really lay down in the panel lines. That's hot stuff and it slightly melted one of the stars on the wings, which was I believe an old Superscale spare I had to use. Fortunately most of the damage should be hidden once I complete the weathering.
I think I've had one problem or another with every sharkmouth I've used; sometimes I'm lucky and the issues are minor but other times not. Where you able to salvage the missing section under the spinner, or do you have to repaint it? I've had to do my share of touch-ups over the years.
Logged
Ignorance is bliss
Vince_M
Sr. Member
Posts: 321
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #79 on:
March 20, 2019, 01:20:55 AM »
Yeah Mark, I tried leaving that piece under the spinner attached when I did the port side, first.
It was just too hard to line it all up and was a big mess. So the side you see here, starboard, I decided to get ahead of it and cut it.. to be added last.
Solvaset it awesome but really "hot". I have a small amount set aside and cut with some water to tone the power down a bit.
The port side is looking better with these large wrinkles. They are nearly gone!
I just lament having to paint touch-up around the spinner and intake corners. Hopefully, white paint will match white on decal...
Logged
Vince_M
Sr. Member
Posts: 321
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #80 on:
March 20, 2019, 08:58:12 PM »
Solvaset is quite the miracle fluid. After several applications, the wrinkles are almost gone! It just takes patience.
Also it is so "hot" you have to avoid brushing over it too many times. Just put it on...and wait.
Note that I also have a small vial of Solvaset/water mix. This mix is less caustic and is good for very thin decals.
Touch up with paint will
still be required. This is one reason I will think twice about doing another shark decal unless it is included in the kit.
The Eagle Strike sheet was made for Mauve or AMT but that means it is not a perfect fit for either!
All of this is telling me that it would have been impossible to finish for the contest due to the decal step taking so long.
I mixed my paint with Future which made it very tough and partially shiny. So, I skipped adding a gloss coat for decals.
I think I'll never do that again because I'm having to fight a lot of "silvering" with repeat applications of solvent...
«
Last Edit: March 20, 2019, 09:02:26 PM by Vince_M
»
Logged
Vince_M
Sr. Member
Posts: 321
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #81 on:
April 12, 2019, 12:08:07 AM »
I was out of town last week so work on the project has taken a slow turn.
All the decals are on and the sharkmouth has been cleaned up, though.
I should have put another coat of future before decals because it was not smooth enough. I spent so much time with decal solvent trying to get them to lay down all the way.
The next step is a coat of Future to seal the decals before weathering. Fortunately I did a few more experiments with airbrushing Future and found an adjustment issue with the airbrush that I think I have fixed. The Future was coming out spitting and I'm so lucky I figured that out before putting it on the model now.
I have like three old "paint horse" models coated with crappy layers of Future...and I'm okay with that!
Logged
Mark Joyce
Sr. Member
Posts: 408
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #82 on:
April 12, 2019, 03:44:14 AM »
I was wondering what was going on, Vince, so thanks for the update. I too have some old warhorses that I use to test paints and Future on. I'm never quite fully satisfied with how I airbrush Future, so am thinking of switching to another type of clear coat.
Logged
Ignorance is bliss
Vince_M
Sr. Member
Posts: 321
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #83 on:
April 15, 2019, 09:08:06 AM »
Slow but sure progress.
I practiced spraying Future until I was satisfied.
Now I have an overcoat of Future on top of the decals. This will protect everything from oil based weathering to come next.
Sorry for the messy workbench! Don't we always end up working in an 8 inch square? LOL
«
Last Edit: April 15, 2019, 09:12:39 AM by Vince_M
»
Logged
Mark Joyce
Sr. Member
Posts: 408
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #84 on:
April 15, 2019, 10:10:39 AM »
Quote from: Vince_M on April 15, 2019, 09:08:06 AM
Don't we always end up working in an 8 inch square?
8"? I wouldn't know what to do with that much space!
Looking great, Vince! I noticed how shiny your Future coat is. I think that's one of my issues with using it. I'm so afraid of applying too much that would fill the engraved panel lines that I probably don't apply enough for a really good glossy coat for the decals.
Logged
Ignorance is bliss
Vince_M
Sr. Member
Posts: 321
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #85 on:
April 15, 2019, 10:25:24 AM »
As long as you don't "pool" the Future or start it sagging, it lays down in the end.
It looks too thick but after two days of curing you can even see scratches.
I have to admit that it is harder to handle than say Testors GlossCote but I do like it when it can be laid down just right.
Your airbrush has to "atomize" it well and you need a light to see how heavy you go.
Also, I have misted on a tiny bit to start...from a distance. This little mist coat allows it to hang on to something.
I only suggest practice and you may start liking it.
Logged
P-40 Admin
Administrator
Sr. Member
Posts: 291
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #86 on:
April 19, 2019, 06:13:57 AM »
Sometimes I had trouble with Future, not sure what, maybe I needed more coats? Often enough I didn't seem to get the gloss.
Logged
Vince_M
Sr. Member
Posts: 321
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #87 on:
April 21, 2019, 02:37:10 AM »
So...you guys are wondering if I'm ever going to finish this darn thing. Yes, I know...
Well my luck is bad sometimes. But good luck has been there too. Read on:
I had recently overcoated my decal with Future. It was foolish of me to assume the tough Future coat would totally protect the decals.
Today I was taping a straight stick just below the exhausts. My plan was to use the stick to align the exhausts.
While aligning the stick with painters tape I learned a hard lesson.
Another view after some cleanup.
So...there was cussing....
But just like my bad luck there was hope... LOPE'S HOPE!!!
Turns out I had another decal sheet in my stash! It was a partial sheet I must have gotten at eBay or a model show. It had more decals I needed!
So a repair was possible and done in minutes:
It is not going to be a winner at the nationals but so what!
You can see that my Future was tinted to provide some sun fading. I will have to see if I can replicate that on my new decal piece here or just weather the whole panel again. Plus I'm going to have exhaust stains I could just extend high...
«
Last Edit: April 21, 2019, 04:16:11 AM by Vince_M
»
Logged
Mark Joyce
Sr. Member
Posts: 408
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #88 on:
April 21, 2019, 10:55:33 PM »
Nice (and fortunate) save on the decal, Vince! I can't even notice there was ever any damage.
Logged
Ignorance is bliss
P-40 Admin
Administrator
Sr. Member
Posts: 291
Re: 1:48 Mauve P-40N "Lope's Hope"
«
Reply #89 on:
April 22, 2019, 05:21:17 AM »
Nice save! A little weathering and minute paint chips will help cover it a bit, looks like it's on a different panel, could always be a replacement panel?
I seem to be having enough of those type of days lately! I have a couple 1/48 Amtech P-40's with the wings and fuselage is put together waiting for me to paint up the cockpit's, just can't get going on them. I am working on a Guillow's Thomas-Moore's Scout with an OX-5 engine conversion, it will be in the colors of Charles Speed Holman, a pilot from Minnesota who also won the Thompson Trophy in 1930. That is if I can ever finish this engine, have a couple other models going at the same time.
Logged
Pages:
1
...
4
5
[
6
]
7
8
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
P-40 Warhawk Forums
-----------------------------
=> General Discussion
=> P-40’s in WWII
=> P-40’s Today
=> P-40 Models
=> Old Forum
Loading...