P-40 Warhawk Forums
December 14, 2024, 09:12:53 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: SMF - Just Installed!
 
   Home   Help Search Login Register  
Pages: [1] 2 3
  Print  
Author Topic: 1/72 Special Hobby RAAF 76 Sqdn. P-40N  (Read 38437 times)
Vince_M
Sr. Member
****
Posts: 322


View Profile
« on: August 01, 2021, 03:11:41 AM »

This Special Hobby 1/72 kit is a real gem.  They are accurate and appear to be easy to build as well.



Of course, I should do it out of the box and avoid...well avoid being me!
But I have already started fiddling.
I have a couple of the True Details cockpit kits for the old Hasegawa kit.
Look how closely it matches the kit sidewalls.  Also they are much thinner.
Should be easy to get them to fit!


« Last Edit: December 30, 2021, 11:38:01 PM by Vince_M » Logged
Mark Joyce
Sr. Member
****
Posts: 408



View Profile
« Reply #1 on: August 03, 2021, 09:33:38 PM »

I've built the "E" and feel these new Special Hobby kits are the best P-40 kits in any scale for exactly the reasons you mention.  I wish Special Hobby would re-tool its "F/L" kit, which is definitely earlier-generation and not nearly as refined.
Logged

Ignorance is bliss
Vince_M
Sr. Member
****
Posts: 322


View Profile
« Reply #2 on: August 03, 2021, 10:01:29 PM »

  I wish Special Hobby would re-tool its "F/L" kit, which is definitely earlier-generation and not nearly as refined.

I also have some of those earlier P-40F/L kits from SH.
You are right...they are not bad but the nose is still not quite right.
No model kit has ever gotten that right.
I have plans to do a resin nose for these new Special Hobby kits.
That is...whenever I get more spare time...   Ugh...
Logged
Vince_M
Sr. Member
****
Posts: 322


View Profile
« Reply #3 on: November 22, 2021, 02:57:51 AM »


I am amazed at the fit of the True Details sidewall parts which were designed for the old Hasegawa kit!
Seems more than a coincidence.




These are the resin wheels upgrade kit from Eduard "Brassin" line.
Beautiful fine detail that I hope I can preserve with some careful painting:


I also plan to use this old Eduard photoetch set also made for the Hasegawa.
It has some useful parts too.  I might do an open ammo bay just for a change of pace.

Logged
Mark Joyce
Sr. Member
****
Posts: 408



View Profile
« Reply #4 on: November 23, 2021, 09:17:04 AM »

Looks like you're off to a good start, Vince!  Have you decided on which markings for it?
Logged

Ignorance is bliss
Vince_M
Sr. Member
****
Posts: 322


View Profile
« Reply #5 on: November 29, 2021, 11:55:54 AM »

I have an old Micro Scale decal sheet with a 76 sq RAAF kittyhawk.
Here is an old thread about this plane:

https://ww2aircraft.net/forum/threads/done-finished-kittyhawk-iv-curtiss-p-40n-raaf-76-sqn-g-sv-a29-1140-group-build.18592/
Logged
Vince_M
Sr. Member
****
Posts: 322


View Profile
« Reply #6 on: December 30, 2021, 11:50:14 PM »

I have noticed that the RAAF in particular used a "double wide" belly tank.  I have not seen any USAAF or RAF P-40s using them.  One can assume that as the Japanese were pushed back, they needed more range.  As I recall the Aussies were pissed that they were given second line role...so much so that some of their top pilots resigned.

Special Hobby included a wide tank in the kit but they only made the tail end of the tank wider.  It's incorrect.
So I took a part from my spares box and modified it myself.  It was a belly tank from an old Hasegawa kit I built in the late 80s.

Here is a pic of the bad one included in the kit:



Now a pic of mine prior to primer and just before I added the "seam" around the circumference.  That was difficult.



Here it is with a coat of primer.  I'm trying to figure out what color to paint it.  Should it be an aluminum paint or neutral gray???








Logged
Vince_M
Sr. Member
****
Posts: 322


View Profile
« Reply #7 on: January 16, 2022, 02:02:52 AM »

Hi all,
Today I installed some ammo bay detail I got from that Eduard photoetch sheet (from the early 90s).
I used black paint and bare metal foil to detail it before gluing it in here:

Logged
P-40 Admin
Administrator
Sr. Member
*****
Posts: 291



View Profile Email
« Reply #8 on: January 27, 2022, 06:06:48 PM »

That's some nice detail in such a small scale
Logged
Vince_M
Sr. Member
****
Posts: 322


View Profile
« Reply #9 on: January 28, 2022, 09:31:43 PM »

Thanks!
I painted the bullets black and then sanded the protruding detail to expose the brass.  It worked perfectly.
Bare metal foil was used to represent the other portions with my carefully cutting out the bullet detail on the feed chutes.
I was worried about the two different metals corroding each other so I painted the brass with a layer of Future floor gloss.
Hope that does it...
Logged
Vince_M
Sr. Member
****
Posts: 322


View Profile
« Reply #10 on: January 29, 2022, 07:45:12 AM »

Here is the decal sheet I'm using.  This was the first decal sheet I ever bought...about 40 years ago.
I've already done four planes from this sheet so I'd say I got my money's worth eh?

Logged
Mark Joyce
Sr. Member
****
Posts: 408



View Profile
« Reply #11 on: January 29, 2022, 10:52:36 PM »

Splendid work so far, Vince!  I have that decal sheet too.  If I recall correctly, I used its markings for Joel Paris' P-40N on my build of his plane.
Logged

Ignorance is bliss
P-40 Admin
Administrator
Sr. Member
*****
Posts: 291



View Profile Email
« Reply #12 on: February 18, 2022, 07:24:37 PM »

Nice markings!
Logged
Vince_M
Sr. Member
****
Posts: 322


View Profile
« Reply #13 on: February 21, 2022, 11:19:15 AM »

Small update.
This is the pilot seat from the old Eduard Photoetch.
It might not be exactly right for P-40N but it has a square back so that was good enough.
The belts are from the old Reheat photo etch sheet.

My eyes are struggling with 1/72.  I love the kit tho.

« Last Edit: February 21, 2022, 11:46:56 AM by Vince_M » Logged
Mark Joyce
Sr. Member
****
Posts: 408



View Profile
« Reply #14 on: March 03, 2022, 08:28:41 AM »

Looking good!
Logged

Ignorance is bliss
Pages: [1] 2 3
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!